The Linden Spitsgatkotter 13.70 is a robust, classic motor yacht from 2011 with a strong steel round-bilge hull and spacious, brightly furnished accommodations for four people. The boat is equipped with a reliable Perkins diesel engine, hydraulic bow and stern thrusters, a hydraulically lowerable aluminum cross mast, and modern navigation and comfort features, including central heating and a well-equipped galley. Outside, the aft deck with teak, a bimini, a polished stainless steel swim ladder, and full sea rails offers both safety and ease of use.
Brand:
Dimensions:
14m x 4.4m x 1.25m
Year built:
2011
Material:
Steel
Location:
Bestboats Roermond,
Motorization:
Perkins 6 cyl. type M150-TI 148 PK
Article number:
2025-1724

General

This well-maintained Linden Spitsgatkotter 13.70, built in 2011 and in excellent condition, exudes classic elegance and solidity, with a robust, round-bilged steel hull that offers both strength and stiffness, while the flowing lines ensure excellent handling. Inside, the saloon is bright and spacious, with a comfortable U-shaped seating area and a large dinette, while the forward and spacious aft cabins each have a double bed, allowing for comfortable accommodation for four people. The warm teak interior with blue upholstery and matching beige curtains combines classic charm with modern comfort. The galley is fully equipped with a 4-burner gas hob, extractor hood, refrigerator, and combination microwave oven. The bathroom has a shower and designer radiator. Heating is provided by a central heating system with radiators throughout the vessel (Kabola HR 400 combi), ensuring pleasant warmth in all living areas. For extra comfort outside under the sprayhood, a Kickstart hot air heater is available, so that a pleasant temperature is also possible on the aft deck.

The deck offers luxurious and practical features: a blue-painted spray hood and bimini covering the entire aft deck, a fully polished stainless steel railing with access on both sides, a polished stainless steel swim ladder integrated into the hull, and a teak-finished aft deck for both ambiance and grip. The bow is equipped with two double fender baskets, one on each side, and for the active water sports enthusiast, there's a hydraulically lowerable aluminum cross mast with stainless steel rigging, ideal for low bridges.

The vessel also excels technically, thanks in part to annual maintenance: a 148-hp Perkins 6-cylinder diesel engine, hydraulic steering, and proportional Vetus bow and stern thrusters ensure effortless and precise sailing. The propeller shaft is water-lubricated and made of high-quality stainless steel, with an Aquadrive constant velocity joint to minimize vibration. Modern Simrad navigation and communication technology, including an autopilot, chartplotter, radar, and AIS, makes long voyages both comfortable and safe. This Linden Spitsgatkotter combines classic lines and robustness with luxury, comfort, and modern technology, perfect for both relaxed and adventurous sailing.

 

General specifications

Designer
Th. Gillissen
Gillissen was a Dutch yacht designer who designed hundreds of vessels from the 1960s onward, including the famous Gillissen vletten and Lindenkotters. His designs are known for their sturdy round-bilge hulls and timeless, classic lines, which remain beloved by boaters today.
Shipyard
Linden Jachtbouw BV
Linden Jachtbouw BV was a Dutch yacht builder from Hardinxveld-Giessendam, founded in 1979 by Piet Linden, known for his high-quality Linden-Kotters designed by Theo Gillissen.
Hull number
87
CE-category
B
Designed for sea voyages in winds up to force 8 on the Beaufort scale and wave heights of up to 4 metres, for example at sea.
CE max weight
1000 kg
Hull shape
Round bilge
The Linden Spitsgatskotter 13.70 has a round-bilged hull made of 6 mm joggled steel, which provides extra stiffness, strength and an elegant, flowing line that improves the sailing characteristics.
Hull colour
Blue
Deck colour
White
Deck construction
Steel
The deck and superstructure of the Linden Spitsgatskotter 13.70 are made of steel; the aft deck and gangway steps are finished in teak, while the gangways have a non-slip coating for safety and practicality.
Windows
The windows of the Linden Spitsgatskotter 13.70 are made of aluminum with double safety glazing, insulated, sun-resistant, and lightly tinted. The saloon has two opening windows. There are also six original rain hoods and mosquito screens for the portholes.
Cockpit
Aft cockpit
Aft cockpit
Vertical clearance
7.6 m
The Linden Spitsgatskotter 13.70 has a vertical clearance of approximately 3.35 meters with the mast lowered, allowing the vessel to pass under low bridges without difficulty.
Minimum height
335 cm
Draught
125 cm
Waterline length
1250 cm
Displacement
22500 kg
Steering system
Wheel
The Linden Spitsgatskotter 13.70 is equipped with hydraulic steering, located under the spray hood, so that steering can be done comfortably and protected from the weather.
Position steering system
Outside
Rudder
Single
Made of steel
Keel/Lee board
Full keel
Comments
  • Hull: round frame, jogged steel 6 mm
  • Deck: steel 5 mm
  • Construction: steel 4 mm

Accommodation

Saloon
Layout and spaces inside
The Linden Spitsgatskotter 13.70 has a practical layout with a spacious saloon, a forward cabin, and a spacious aft cabin, a well-equipped galley, and a comfortable bathroom. The living areas are bright, uncluttered, and designed for comfort on longer voyages.
Headroom
208 cm
The Linden Spitsgatskotter 13.70 offers generous standing headroom: approximately 2.03 m in the forward cabin, approximately 2.08 m in the saloon, and approximately 1.92 m in the aft cabin, creating a comfortable and spacious feel in all areas.
Separate dining area
Engine room
Cabins
2
The Linden Spitsgatskotter 13.70 has one cabin in the forward cabin and one cabin in the aft cabin, with the owner's cabin located aft and the forward cabin suitable for guests or crew.
Berths
Fixed: 4
The Linden Spitsgatskotter 13.70 has a spacious, freestanding double bed in the aft cabin and a double point bed in the forward cabin, so both cabins offer comfortable sleeping space for several people.
Type Interior
Modern, wood look
The interior of the Linden Spitsgatskotter 13.70 is finished in teak, creating a warm, classic feel. The woodwork is meticulously finished, with neatly integrated cabinets and storage options, making the interior both stylish and practical.
Color upholstery
Blue
Mattresses
Cushions
Curtains
Beige curtains matching the interior
Water tank & material
750 Liter Stainless steel
With manhole cover
Water tank gauge

Old
Waste water tank
200 Liter Stainless steel
With manhole cover
Waste water tank gauge
Waste water tank drainpump
Deck suction
Water system
Pressure system
Hot water
Kabola HR 400 combi with thermostat
Outside water
Deck wash pump - Deck shower
Number of showers
1
The Linden Spitsgatskotter 13.70 has a bathroom with a shower equipped with a designer radiator, which is separate from the toilet, ensuring comfort and privacy on board.
Toilets
1 Electric
Separated from shower, with design radiator
Television

Sharp TV (digital antenna)
Radio/CD player

Kenwood radio with 2x speakers in living room
Cooker & fuel
4 Burner(s) Gas
The galley of the Linden Spitsgatskotter 13.70 is equipped with a 4-burner Gimeg gas stove with extractor hood, which makes cooking on board practical and efficient.
Oven

Severin combination microwave
Microwave

Severin combination microwave
Fridge & power source
Electric
113 Liter
Isotherm with freezer compartment
Freezer
Compartment in refrigerator
Heating
Hot air Central heating
Inside the boat, there's central heating via a Kabola HR 400 combi heater, which heats all rooms (convectors/radiators). Outside, under the sprayhood, there's a hot-air heater.
Comments
  • Candy washing machine
  • Standing height:
    Forecabin : approx. 2.03 m
    Salon : approx. 2.08 m
    Aft cabin : approx. 1.92 m
  • Safe on board
  • Waste water tank drain pump is electric
  • Heavy teak entrance door with anti-burglary strip
  • Ventilation grille and fans for shower and toilet

 

 

Engine, Electrics

Number of identical engines
1
Starting type
Electric
Type
Inboard
Brand
Perkins
Perkins is a British brand known worldwide for its reliable diesel engines, particularly for marine, agricultural, and industrial applications. They are popular for their durability, ease of maintenance, and consistent performance.
Model
M 150-TI
Year
2011
Number of cylinders
6
Power
148 hp
Hours counter
Operating hours
1830
Fuel
Diesel
Gearbox
PRM-Newage Conventry
Transmission
Shaft
Propulsion
Propellor
The Linden Spitsgatskotter 13.70 has a 5-bladed propeller. The propeller shaft system is equipped with an Aquadrive constant velocity joint and thrust bearing, while the propeller shaft and stern tube are water-lubricated and made of high-quality 317 stainless steel, ensuring durability, smooth operation, and minimal vibration while sailing.
Cooling system
Indirect
Indirect cooling is a cooling system where the engine is cooled via a heat exchanger, preventing external cooling water (e.g., river or seawater) from flowing directly through the engine. This prevents corrosion and extends the engine's lifespan.
Fuel tanks
1
Total fuel tank(s) capacity
800 Liter
Fuel tank material
Steel
Fuel tank gauge
Vetus
Tachometer
VDO
Oil pressure gauge
VDO
Temperature gauge
VDO
Bow thruster
Hydraulic
Vetus BOW 160 proportional
Stern thruster
Hydraulic
Vetus BOW 160 proportional
Battery
7 x Ah
The electrical system of the Linden Spitsgatskotter 13.70 consists of two 50 Ah starter batteries, four 230 Ah semi-traction service batteries (August 2025), and one 70 Ah starter battery for the generator, providing sufficient power for engines, equipment, and onboard comfort.
Battery charger
60 A
Mastervolt Mass Combi 24/2500-60
Alternator
A
Generator
Mastervolt Whisper generator 3,5kw
Inverter
2500 Watt
Mastervolt Mass Combi 24/2500-60
Voltmeter

Shore power

Shore power cable
Solar panel
Watt
Voltage
12V 24V 220V
Comments
  • Hydraulic steering and emergency steering according to CE standard
  • Fuel filter on engine with water alarm
  • Air intakes 2 x polished stainless steel for engine room
  • Engine compartment ventilation grille and fans

Navigation and electronics

Log/speed
Simrad IS20
Depth gauge
Simrad IS20
Navigation lights
Rudder position indicator
Autopilot
Simrad Stuurautomaat AP28
Chart plotter
Simrad NSE 12
Radar
Simrad BR24
AIS
Simrad (2024)
VHF
Simrad, Atis en AIS RS4-B (2024)

Deck equipment

Anchors & material
1 x Poolanker Stainless steel
30 meters of anchor chain
Anchor connection
Chain
Anchor windlass
Manual
Manual Lofrans anchor winch with polished stainless steel anchor plate with protection strips
Spray hood

Blue-colored spray hood that can be closed (2024)
Bimini

Blue colored bimini over the entire aft deck.
Boat cover

Cover for wheelhouse, steering wheel, ship horn, steering seat
Sea rails

Full polished stainless steel railing with entry on both sides.
Swimming ladder

Stainless steel swimming ladder integrated into the hull.
Sail Lowering System

Mast can be lowered hydraulically
Teak deck
Fenders, lines

Complete set
Comments
  • Aft deck is covered with teak
  • On the bow there are two double fender baskets, one on each side
  • 3 Windshield wipers, heavy-duty version with 2 settings
  • Air horn with compressor
  • 12 polished stainless steel bollards with base plate
  • Polished stainless steel flagpole

Safety

Bilge pump
Electric
Electric bilge pumps in engine room, bow, stern with automatic float switch
Fire extinguisher

Automatic fire extinguishing system in engine room
Gas bottle locker with drain

Self draining cockpit
Comments
  • Ventilation/escape hatch in forward and aft cabin
Subject
I would like to receive more information about the Linden Spitsgatkotter 13.70
Please wait a moment while the form is being sent

Bestboats International Yachtbroker

Selling your Yacht?

We are pleased that you are looking for a new yacht with us. 
 But have you thought about selling your current yacht? Or maybe you want to know about the possibilities of trading in your yacht? 

As a certified yacht broker, we will explain what our Total Care sales plan entails. Or we will make a tailored offer for your trade-in.
Read more

RIBS and Tenders from Pirelli Speedboats

Are you looking for speed, design, luxury and comfort? Take a look at our exclusive selection of Pirelli RIBs and tenders. Pirelli is synonymous with high quality and eye-catching design. 

The exclusive Pirelli Tecnoribs and Jet Tenders stand out for their robust design. Combined with a high level of comfort and exciting sailing performance, these boats have a lot to offer you.

Read more

New build Yachts from Riviera Yachts

Do you choose luxury, comfort, and the ultimate enjoyment of peace and space on the water? Then take a look at our range of new yachts from Riviera Yachts. 

The various models from this renowned Australian yacht builder offer you endless possibilities – both at sea and on inland waters.
Read more

The Purchase Process: How Does It Work?

If you are working with a yacht broker for the first time, it’s helpful to understand how the purchase process works and what you can expect from us.
1

Orientation and Making an Offer

Do you have a yacht in mind? You can schedule a viewing without obligation to determine if the yacht meets your expectations. A technical inspection is not necessary at this stage. 

Based on your impression, you can make an offer. We act as an intermediary and negotiate on your behalf with the yacht's owner.
2

Price Agreement and Purchase Agreement

Once we have agreed on the price, we will draw up a purchase agreement. This usually includes a clause making the purchase subject to a survey by an expert. 

When signing the agreement, we request a 10% deposit. This amount will be held in a secure third-party escrow account.

3

Survey and Finalization

An expert will carry out a comprehensive survey of the yacht. If any issues are found, the seller will resolve them or compensation will be offered if you prefer to handle the repairs yourself. 

If the issues are too significant, you can cancel the purchase.
4

Final Payment and Delivery

Once the issues are resolved and you are satisfied, you pay the remaining 90%. This amount will also be securely held in the third-party escrow account. Once you confirm that the yacht meets your expectations, you will sign the delivery document. 

Only then will the funds be released to the seller, and we will schedule the official handover.
5

Handover and Transfer

Together, we will carefully review all documentation so you know exactly what you are purchasing. We will also inspect the yacht to ensure all issues have been addressed. Of course, we will provide you with explanations on the onboard equipment and key systems. 

Once everything is clear and meets your satisfaction, we will officially hand over the keys and your new boating adventure can begin.
.

🚤 Save the Date – BestBoats Select Days

 From Friday, March 20 through Monday, March 23, 2026, we open our doors for an exclusive weekend full of experiences on and around the water.

If you are planning to buy or sell a yacht, you are warmly welcome during the BestBoats Select Days!
More info: Bestboats Select Days

We look forward to welcoming you!
Team BestBoats Roermond